Thursday, February 9, 2012

Analog Adapters | Types of Terminal Devices



Dedicated communication devices such as modems and fax machines are still very prevalent in business today. Although these devices could be replaced with more modern, reliable, and faster technologies, the new technologies have not yet been embraced.
Therefore, in order to use these existing technologies, analog adapters allow companies to continue using legacy devices such as traditional fax machines. An analog adapter usually consists of an Ethernet jack with which the device will connect to your network and an FXS port (telephone jack) which will connect to your traditional communication device (such as a fax machine).
Another common use of an analog adapter is to connect a cordless phone for those requiring mobility around the office. Granted there are WIFI SIP phones in the market, often users will find that the WIFI signals interfere with other frequency emitting devices. Such interference can cause distortion or the calls to drop.
One issue with analog adapters is their use with traditional fax machines. For years the reliability of faxing over an adapter was poor at best. Today analog adapters are becoming equipped with T.38 capability. This protocol allows regular faxes to be sent over UDP. The use of T.38 dramatically improves the reliability of faxing. However, keep in mind—your VSP as well as your PBX must also support T.38 in order for the fax to be transmitted using this protocol. As of version 1.4, Asterisk now supports T.38 negotiation for SIP users and the related pass through of UDPTL T.38 data. Please note that Asterisk currently cannot terminate T.38 calls or act as a T.38 PSTN gateway without external support.
One extra note about faxing—Asterisk supports receiving and sending faxes through an add-on called SpanDSP. With this Asterisk can receive a fax and turn it into a TIFF file. This TIFF file can then be further processed to become a PostScript or PDF file and be emailed to the proper recipient. Another notable fax detection solution is NVFaxDetect. The installation of this add-on is not covered here, as it is changing rapidly.
These communication devices are usually supported for legacy reasons. We should continually strive to reduce outdated technologies and replace them with up-to-date solutions.

Another PBX

We can connect PBXs together to provide services to users hosted on another PBX. We can use SIP, PRI, T1, H.323, or IAX to connect the PBXs.
If we are connecting multiple Asterisk PBXs, we should use IAX. The IAX protocol has a number of features with this specific use in mind, such as the ability to have multiple conversations trunked into the same UDP stream yielding greater efficiency.

No comments:

Post a Comment

Popular Posts